Wednesday, November 28, 2012

Ductless Cooling - Benefits Systems and Components.


 



 Ductless Cooling in Energy. 



 



Reducing our energy consumption translates into savings for the family or personal economy and helps reduce emissions of greenhouse gases to the atmosphere, the main cause of climate change. The higher the SEER greater energy savings in our company have systems up to 22 SEER. These days, it is very rare to see systems below SEER 9 in USA, since the older units are being replaced by high efficiency. Substantial energy savings can be obtained more efficient equipment.



Ductless Heat Air. Performance Indoor Units.



The indoor unit is the unit that goes into the room to be conditioned. There are different types of indoor units, the main difference is in how they are installed, the most common in homes is what is installed on the top of a wall which is called Mini Split High Wall (Wall high), however there is also a type of unit that is installed on the ceiling of the room or on the wall but on the lower floor even recharged, this unit is called Mini split floor Ceiling. This is the visible part inside the room or space.



Ductless Cooling and Heating Systems. Importance External Units.



This unit is in charge of reject heat to the outside so the air coming out is hot, that is why we should not be placed in an enclosed area, because the absence of ventilation equipment to overheat and shut down to avoid being damaged. The indoor and outdoor unit must be connected together. On the one hand must have copper pipe connection for refrigerant gas and moreover must have electrical connections between the two.



Mitsubishi Electric Ductless Cooling & Heating Systems. What is a Compressor?



It consists of mechanically forcing the circulation of a fluid in a closed circuit, creating areas of high and low pressure in order that: the fluid can absorb heat at a place and dissipate it in the other. The cooling process involves a closed circuit, and the refrigerant can not circulate outside. Besides being the most expensive part of equipment is the performing, if not all, most of the energy consumption.


No comments:

Post a Comment