Thursday, April 25, 2013

Comfort Aire Senville Mini Split. Consider Indoor Air Quality.


Comfort Aire Senville Mini Split. Ventilation for Homes.



If too little outdoor air enters a home, pollutants can sometimes accumulate to levels that can pose health and comfort problems. Likewise, one approach to lowering the concentrations of indoor air pollutants in your home is to increase the amount of outdoor air coming in.


 


Outdoor air enters and leaves a house by: infiltration, natural ventilation, and mechanical ventilation. In a process known as infiltration, outdoor air flows into the house through openings, joints, and cracks in walls, floors, and ceilings, and around windows and doors (air may also move out of the house in this manner — this is called exfiltration).


Comfort Aire Mini Split Reviews. Natural Ventilation.



In natural ventilation, air moves through opened windows and doors. Air movement associated with infiltration and natural ventilation is caused by air temperature differences between indoors and outdoors and by wind. Finally, there are a number of mechanical ventilation devices, from exhaust (vented outdoors) fans that intermittently remove air from a single room, such as bathrooms and the kitchen, to air handling systems that use fans and duct work to continuously remove indoor air and distribute filtered and conditioned outdoor air to strategic points throughout the house. The rate at which outdoor air replaces indoor air is described as the air exchange rate. When there is little infiltration, natural ventilation, or mechanical ventilation, the air exchange rate is low and pollutant levels can increase.


Comfort Aire Mini Split Error Codes. Pollutants.





Unless they are built with means of mechanical ventilation, homes that are designed and constructed to minimize the amount of outdoor air that can "leak" into and out of the home may have higher pollutant levels than other homes. However, because some weather conditions can drastically reduce the amount of outdoor air that enters a home, pollutants can build up even in homes that are normally considered "leaky."




Comfort Aire Mini Split Parts. Mechanical Ventilation System.




Ideally, new homes will be built to minimize leakage to control energy loss, improve comfort, and minimize the transport of moisture and pollutants through the building shell. These homes should then also have mechanical ventilation to remove pollutants generated in the home and provide outdoor air in a controlled manner. Whether a mechanical ventilation system makes sense in your existing homes depends on the house, your existing heating, ventilation, and air-conditioning (HVAC) system, and the changes you have planned. You should discuss this with your HVAC contractor. A local Weatherization office, or building performance contractor, might also be able to help you with this decision or point you to local experts.


Friday, April 19, 2013

Mini Split Line Set Senville - Most Common Types of Insulation.


Mini Split Line Set Senville: BATT AND ROLL INSULATION.



Blanket insulation -- the most common and widely available type of insulation -- comes in the form of batts or rolls. It consists of flexible fibers, most commonly fiberglass. You also can find batts and rolls made from mineral (rock and slag) wool, plastic fibers, and natural fibers, such as cotton and sheep's wool. Learn more about these insulation materials.


 


Batts and rolls are available in widths suited to standard spacing of wall studs, attic trusses or rafters, and floor joists. Continuous rolls can be hand-cut and trimmed to fit. They are available with or without facings. Manufacturers often attach a facing (such as kraft paper, foil-kraft paper, or vinyl) to act as a vapor barrier and/or air barrier. Batts with a special flame-resistant facing are available in various widths for basement walls and other places where the insulation will be left exposed. A facing also helps facilitate fastening during installation. However, unfaced batts are a better choice when adding insulation over existing insulation.


50' Line Set. CONCRETE BLOCK INSULATION.



Concrete blocks are used to build home foundations and walls, and there are several ways to insulate them. If the cores aren’t filled with steel and concrete for structural reasons, they can be filled with insulation, which raises the average wall R-value. Field studies and computer simulations have shown, however, that core filling of any type offers little fuel savings, because heat is readily conducted through the solid parts of the walls such as block webs and mortar joints.


 


In the United States, two varieties of solid, precast autoclaved concrete masonry units are now available: autoclaved aerated concrete (AAC) and autoclaved cellular concrete (ACC). This material contains about 80% air by volume and has been commonly used in Europe since the late 1940s. Autoclaved concrete has ten times the insulating value of conventional concrete. The R-1.1 per inch blocks are large, light, and easily sawed, nailed, and shaped with ordinary tools. The material absorbs water readily, so it requires protection from moisture. Precast ACC uses fly ash instead of high-silica sand, which distinguishes it from AAC. Fly ash is a waste ash produced from burning coal in electric power plants.


AC Line Sets. FOAM BOARD OR RIGID FOAM.



Foam boards -- rigid panels of insulation -- can be used to insulate almost any part of your home, from the roof down to the foundation. They provide good thermal resistance, and reduce heat conduction through structural elements, like wood and steel studs. The most common types of materials used in making foam board include polystyrene, polyisocyanurate (polyiso), and polyurethane.



HVAC Line Sets. INSULATING CONCRETE FORMS.



Insulating concrete forms (ICFs) are basically forms for poured concrete walls, which remain as part of the wall assembly. This system creates walls with a high thermal resistance, typically about R-20. Even though ICF homes are constructed using concrete, they look like traditional stick-built homes.


 


ICF systems consist of interconnected foam boards or interlocking, hollow-core foam insulation blocks. Foam boards are fastened together using plastic ties. Along with the foam boards, steel rods (rebar) can be added for reinforcement before the concrete is poured. When using foam blocks, steel rods are often used inside the hollow cores to strengthen the walls.


 


The foam webbing around the concrete-filled cores of blocks can provide easy access for insects and groundwater. To help prevent these problems, some manufacturers make insecticide-treated foam blocks and promote methods for waterproofing them. Installing an ICF system requires an experienced contractor, available through the Insulating Concrete Form Association.

How to Install Aircon Mini Split Air Conditioner? Tips...


How to Install Aircon Mini Split Air Conditioner? ROLLS AND BATTS.



Rolls and batts -- or blankets -- are flexible products made from mineral fibers, such as fiberglass and rock wool. They are available in widths suited to standard spacing of wall studs and attic or floor joists: 2 inch x 4 inch walls can hold R-13 or R-15 batts; 2 inch x 6 inch walls can use R-19 or R-21 products.



How to Install Central Air Conditioner Unit? LOOSE-FILL INSULATION.



Loose-fill insulation is usually made of fiberglass, rock wool, or cellulose in the form of loose fibers or fiber pellets. It should be blown into spaces using special pneumatic equipment. The blown-in material conforms readily to odd-sized building cavities and attics with wires, ducts, and pipes, making it well suited for places where it is difficult to effectively install other types of insulation.


Cleaning Air Conditioner. RIGID FOAM INSULATION.



Rigid foam insulation is typically more expensive than rolls and batts or loose-fill insulation, but it is very effective in exterior wall sheathing, interior sheathing for basement walls, and special applications such as attic hatches. Foam insulation R-values range from R-4 to R-6.5 per inch of thickness, which is up to 2 times greater than most other insulating materials of the same thickness.




There are two types of foam-in-place insulation: closed-cell and open-cell. Both are typically made with polyurethane. With closed-cell foam, the high-density cells are closed and filled with a gas that helps the foam expand to fill the spaces around it. Closed-cell foam is the most effective, with an insulation value of around R-6.2 per inch of thickness.


 


Open-cell foam cells are not as dense and are filled with air, which gives the insulation a spongy texture. Open-cell foam insulation value is around R-3.7 per inch of thickness.


 


The type of insulation you should choose depends on how you will use it and on your budget. While closed-cell foam has a greater R-value and provides stronger resistance against moisture and air leakage, the material is also much denser and is more expensive to install. Open-cell foam is lighter and less expensive but should not be used below ground level where it could absorb water. Consult a professional insulation installer to decide what type of insulation is best for you.

How To Install a Mini Split Air Conditioner? Summer Saving Tips.


How To Install a Mini Split Air Conditioner?. OPERATE YOUR THERMOSTAT EFFICIENTLY.



Set your thermostat as high as comfortably possible in the summer. The smaller the difference between the indoor and outdoor temperatures, the lower your overall cooling bill will be. Keep your house warmer than normal when you are away, and lower the thermostat setting to 78°F (26°C) only when you are at home and need cooling. A programmable thermostat can make it easy to set back your temperature.


 


Find out how to operate your thermostat for maximum energy savings. Also see the ENERGY STAR® June 5, 2008, podcast for video instructions on operating your programmable thermostat. Avoid setting your thermostat at a colder setting than normal when you turn on your air conditioner. It will not cool your home any faster and could result in excessive cooling and unnecessary expense.


Parts of an Air Conditioning System. USE YOUR WINDOWS TO GAIN COOL AIR AND KEEP OUT HEAT.



If you live in a climate where it cools off at night, turn off your cooling system and open your windows while sleeping. When you wake in the morning, shut the windows and blinds to capture the cool air. Learn more about natural ventilation. Install window coverings to prevent heat gain through your windows. Find out about window treatments and coverings that can improve energy efficiency.


How to Install a Split Unit AC? USE FANS AND VENTILATION STRATEGIES TO COOL YOUR HOME.



If you use air conditioning, a ceiling fan will allow you to raise the thermostat setting about 4°F with no reduction in comfort. Learn more about using a ceiling fan to increase cooling efficiency. Find ENERGY STAR ceiling fans. Turn off ceiling fans when you leave the room. Remember that fans cool people, not rooms, by creating a wind chill effect. When you shower or take a bath, use the bathroom fan to remove the heat and humidity from your home. Your laundry room might also benefit from spot ventilation. Make sure bathroom and kitchen fans are vented to the outside (not just to the attic).



Schedule regular maintenance for your cooling equipment. Learn about operating and maintaining your air conditioner, evaporative cooler, or heat pump. Avoid placing lamps or TV sets near your room air-conditioning thermostat. The thermostat senses heat from these appliances, which can cause the air conditioner to run longer than necessary.


 


Learn additional tips for operating a room air conditioner efficiently. Vacuum registers regularly to remove any dust buildup. Ensure that furniture and other objects are not blocking the airflow through your registers.

3 Ton Mini Split - Central Air Conditioning System!


3 Ton Mini Split. First things first. What does HVAC mean?



While the Energy Center usually tries to avoid the use of acronyms, HVAC is in common use in the heating and cooling industry. It stands for "heating, ventilation and air conditioning," three functions often combined into one system in today's modern homes and buildings. Warmed or cooled or dehumidified air flows through a series of tubes - called ducts - to be distributed to all the rooms of your house. A central HVAC system is the most quiet and convenient way to cool an entire home.



Split Heat Pump. Energy Efficiency. 




Like many other appliances, HVAC systems have improved in energy efficiency in the last decade. As a result, you can save money and increase your comfort by properly maintaining and upgrading your HVAC equipment.


 


Another development of the 1990s is the whole house approach to heating and cooling. Coupled with an energy efficient furnace, heat pump or air-conditioner, the whole house approach can have a great impact on your energy bills. By combining proper equipment maintenance and upgrades with appropriate insulation, weatherization and thermostat settings - properly regulated with a programmable thermostat, of course - you may be able to cut your energy bills in half.



3 Ton Heat Pump. ENERGY STAR®.





All major appliances including gas furnaces, boilers, air conditioners and heat pumps sold in USA meet the Title-24 energy efficiency standards. If you are thinking about purchasing a new central furnace, check the ENERGY STAR® database, which uses information supplied by the USA Energy Commission. It displays information on most energy efficient appliances in a consumer-friendly, easy-to-use.




1 Ton Split System. Heat Pump and Central Air Conditioning.




There are also central HVAC units called heat pumps that combine both the heating and cooling functions. If you heat your home with electricity, a heat pump system is the most efficient unit to use in moderate climates. It can provide up to three times more heating than the equivalent amount of electrical energy it consumes. A heat pump can trim the amount of electricity you use for heating as much as 30 percent to 40 percent.


 


Even though air conditioners and heat pumps require the use of some different components, they both operate on the same basic principles.


Thursday, April 18, 2013

Heat Pump Mini Split System Environmentally Friendly!


Heat Pump Mini Split System. Efficiency of a Heat Pump.



To be environmentally beneficial, the whole heating system must be properly specified and the house very well insulated. You can vastly improve the efficiency of your existing property with simple energy conservation measures.


Mini Split Heat Pump Reviews. COP.



The efficiency of a heat pump is given by its coefficient of performance, or COP. A system operating at COP3 will give out 3 units of heat energy for each unit of electricity used. However, you need to bear in mind that most grid electricity is generated from fossil fuels or nuclear power, at efficiencies of only 30 to 40%, so you’ll need a very good COP to outweigh this. If a system has a poor COP you’d be better off with a gas boiler, which would give off less carbon dioxide and make a smaller contribution to climate change. Electricity generation also causes other forms of pollution: sulphur & nitrogen oxides (that cause acid rain), particulates, mining impacts, and nuclear waste.


Ductless Heat Pump Reviews Consumer Reports. ‘Green Tariff’.




An Energy Saving Trust field trial of 83 heat pumps in found a wide variance in performance - only a few reached a COP of 3 or more. The average COP for air source heat pumps was 2.1, while the average for ground source systems was 2.3. Many were early installations, and as installers gain experience, performance should improve. To avoid a low COP, ensure that a home is well-insulated, has a low-temperature heating system and good heating controls, and that the ground loop or air-source unit has been adequately sized. 


 


You can sign up for a ‘green tariff’, and have your electricity use allocated to renewable sources such as wind or hydro power. This is an excellent way to help promote the growth of the renewable  energy industry, but it’s not a green light to use loads of electricity! Doing so will increase overall electricity demand, and until more renewable energy technologies are ready, this will increase the use of fossil fuels and nuclear power.



Mini Split Heat Pump Installation Cost. (HFCs). 



If you have a stream that would be suitable for a micro-hydro system, then a renewably-powered heat pump could be feasible and beneficial.  A heat pump contains about 2 kilos of refrigerant, usually hydrofluorocarbons (HFCs). These are potent greenhouse gases (about 1600 times more powerful than carbon dioxide) and a leak during or after the system’s life will have a damaging impact. Some suppliers use hydrocarbon refrigerants such as R290 or R600a (propane & isobutane); these will have a much lower impact if accidentally leaked.

Install Ductless Mini Split Air Conditioner with Heat Pump.


Install Ductless Mini Split Air Conditioner with Heat Pump - ADVANCED TECHNOLOGIES: REVERSE CYCLE CHILLERS.



One of the more notable innovations in air-source heat pumps is called a reverse cycle chiller (RCC). It offers the advantages of allowing the homeowner to choose from a wide variety of heating and cooling distribution systems, from radiant floor systems to forced air systems with multiple zones. It also offers the potential for lower winter electric bills and hotter air out of the supply vents for greater comfort.


 


An RCC is especially economical for all-electric homes or in areas where natural gas is not available. Depending on other fuel rates, it may even be the least expensive heating option among the remaining heating fuel choices.


Mitsubishi Mini Split. Standard 12 SEER, Single Speed.



The system consists of a standard 12 SEER, single speed, air-source heat pump, sized to the heating load rather than the usual smaller summer cooling load. The heat pump is connected to a large, heavily insulated tank of water that the heat pump heats or cools, depending on the season of the year. Most systems will use a fan coil with ducts, using the stored water to heat or cool the air and distribute it to the house.


 


The RCC system allows the heat pump to operate at peak efficiency even at low temperatures. This provides greater comfort and economy without the need for electric resistance auxiliary heating coils.


 


The RCC can also be equipped with a refrigeration heat reclaimer, which is similar to the common desuperheater coil found on the high-end heat pumps and air conditioners. The combined system costs about 25% more than a standard heat pump of similar size, and the simple payback on the additional cost in areas where natural gas is not available is about 2 to 3 years.


Mitsubishi Air Conditioning Ductless. COLD CLIMATE HEAT PUMP.



One company has developed the cold climate heat pump, which features a two-speed, two-cylinder compressor for efficient operation, a back-up booster compressor that allows the system to operate efficiently down to 15°F, and a plate heat exchanger called an "economizer" that further extends the performance of the heat pump to well below 0°F. The system has been tested favorably by several utilities and may soon be available to consumers.


YMGI Mini Split. ALL-CLIMATE HEAT PUMP.



Another promising technology is an All Climate Heat Pump, which the manufacturer says can operate in the coldest days of winter without supplemental heat, maintaining comfortable indoor temperatures even when the temperature outdoors falls below zero. The heat pump could reduce heating and cooling costs 25% to 60%.


 


While the design of most heat pumps puts the focus on cooling, the All Climate Heat Pump was designed with heating as the primary focus. Initial costs for the All Climate Heat Pump are high, but if it continues to work as well as predicted, the energy savings over the life of the system would more than compensate for the up-front cost.