Mini Split Heat Pump AC by Mr Cool in Minisplitwarehouse.com

 Mini Split Heat Pump AC by Mr Cool in Minisplitwarehouse.com Experts are here to help you purchase a Mini Split System at the best price. Get DIY 24000 Btu 20 SEER Mini Split Heat Pump AC by Mr Cool. Price: $2,239.99 ex. tax. Call us 877-770-3548 or visit our website.

LINK:

https://www.minisplitwarehouse.com/category/brands

This System Heats & Cools

*Included In This Package:

*One (1) Indoor Unit with Remote & Wifi


*One (1) Outdoor Unit

*Low Ambient Cooling/Heating to 5F
(Toshiba GMCC Compressor)
Gold Fin Coating, Leak Detection, Quiet Operation, DC Inverter

*One (1) DIY/Quick Connect 25' Install Kit
(Copper & Wire)




*Factory Warranty:
5 years Parts, 7 Year Compressor

Take full control of your home comfort with the 3rd Generation MrCool DIY Mini Split System. Homeowners can easily install this outdoor heat pump condenser and indoor air handler since installation requires no special tools, equipment, or training. This full heating and cooling system can be installed in just a few hours. 

The key to the 3rd Generation MrCool DIY  Ductless Heat Pump Mini Split System's easy installation capability is the pre-charged Quick Connect line set — MrCool's cutting-edge technology that makes setup safe, simple, and cost effective. The line set uses the environmentally friendly, and chlorine-free refrigerant R-410A, which is an alternative to old refrigerant that won't damage the ozone layer.

But what if your new MrCool ductless mini split runs low on that same R-410A refrigerant? Not to worry, since an alert will appear on your indoor unit. It lets you know so you can address issues before they cause costly damage. Should a power outage occur, the 3rd Generation MrCool DIY Ductless Heat Pump Mini Split System will auto start once power returns, making your home comfortable as soon as possible.

That's not all. The MrCool indoor wall unit also displays alerts when the air handler filter needs cleaning or replacement. With this feature, you can trust the air you breathe is always fresh! The cleaning alert displays after 240 hours of operation and filter replacement is suggested after nearly 3,000 hours of run time.

The outdoor MrCool mini split condenser can be anchored to the ground or attached to a wall with a bracket. 

The 3rd Generation MrCool DIY Ductless Heat Pump Mini Split System can handle a wide range of outdoor temperatures, as low as 5°F and as high as 122°F. Plus, with the auto, sleep, and timer modes you can customize your system to run to your preferences and keep your HVAC running efficiently; saving money.

When the 3rd Generation MrCool DIY mini split is in COOL, DRY, or AUTO mode, an anti-mildew function activates and keeps a low fan running for about 10 minutes with low airflow to dry up condensation that can cause mildew growth. The unit also runs quietly and smoothly so you can trust it will work without any noisy interruptions while it keeps your air clean and at just the right temperature.

Want exacting control? You can control the 3rd Generation MrCool DIY Ductless Heat Pump Mini Split System wirelessly with the included remote, Google Assistant, Amazon Alexa, or an app from your Apple or Android device. Get custom performance from your ductless MrCool mini split system with the FOLLOW ME feature, an option for your maximum comfort that will track the air temperature around you as long as you keep the remote nearby.

The only ductless air conditioning and heating unit that is easy to install for thousands less than a conventional HVAC system. Mr Cool DIY Ductless Mini Split heat pump even adjusts the temperature to the perfect degree wherever you are in your room.

A MRCOOL DIY Series heat pump is the only ductless mini split system on the market explicitly designed for amateur installation. You don't need special tools or training to install this high efficiency heat pump. The line set precharged with R410A refrigerant, the quick hook-up electrical connections, and the quality engineering mean just about anyone can install a MRCOOL DIY in their home with no problem at all in only a few short hours. If you want great air comfort without paying an arm and a leg for installation, you want an easy-to-use MRCOOL DIY Series ductless heat pump.

Unlike any other ductless heat pump on the market, the MRCOOL DIY series is specifically designed for easy installation. The MRCOOL DIY series comes with a precharged refrigerant line, alleviating one major obstacle to amateur installation in a single stroke.

MRCOOL ductless mini split air conditioners and heat pumps are the cutting edge of what modern, flexible fabrication can produce. These air conditioners rely on state-of-the-art manufacturing processes and advanced design to deliver high efficiency air comfort anywhere you need it.

• EASY DIY INSTALLATION The included 25′ pre-charged R410 quick connect lineset allows you to install this innovative ductless system without special tools, equipment, or training.
• FOLLOW ME Personalized Performance for wherever you are in the room. Keep the remote close by, and MRCOOL DIY will track the air temperature around you to ensure you receive maximum comfort.
• LOW AMBIENT COOLING Cool all the way down to 5°F. Maintain cooling even when the outside temperature reaches 5 degrees. This feature makes the MRCOOL DIY the ideal system for server rooms, greenhouses, and any other application that requires cooling all year.
• AUTO RESTART Never lift a finger after a power outage. The MRCOOL DIY auto restart will have the unit running again in no time at all.
• GOLD FIN CONDENSER Live on the coast? Don’t worry, our condenser is built to resist long term corrosion.
• REMOTE APP WIFI CONTROL Control your DIY anywhere with your Apple or Android smart device and an internet connection.
• TEMPERATURE COMPENSATION Our temperature compensation technology help keeps you comfortable in any weather conditions
• LEAKAGE DETECTION When the MRCOOL DIY detects low coolant an alarm will sound to alert you to the problem. This will prevent damage to the compressor while you maintain high air comfort.
• SLEEP MODE We made Sleep Mode easy to program to save money, and let you sleep a little easier.
• LOUVER POSITION MEMORY The louver will automatically move to the same position as you set last time the unit was turned on.

Pros of Using DIY Units	Cons of Using DIY Units
NO HVAC Contractor Needed	Higher Cost Compared to Regular Units
Easy to Install, as long as you read & follow directions	Many problems, if you dont follow directions
Best for people with technical experience	NOT for people with no technical experience
Includes the components you need for a basic install	Doesnt include everything you need for a full install
	DIY troubleshoot if something goes wrong, they dont just replace a unit if you have a problem.
	Have to DIY replacement parts (IE:PCB, Motors, etc)
	Limit on copper line length, have to use the kits provided
	Limited on indoor sizes, and only wall mount indoor units
	No way to know if there are leaks in the coils
	If there is a leak, you have to hire a HVAC tech to re-fill
	Most people do not have the all the tools needed
	Building Departments will not issue permits for DIY

10 Master Cartons of Install Kits in Minisplitwarehouse.com

 10 Master Cartons of Install Kits in Minisplitwarehouse.com No matter what your requirements are, our range of smart, reliable and energy efficient ducted air conditioners means we have the solution to suit any lifestyle. Get 10 Master Cartons of Install Kits for Ductless Systems Wholesale Lot. Price: $6,360.00 ex. tax. Call us 877-770-3548 or visit our website.

LINK:

https://www.minisplitwarehouse.com/page/special-pricing

Included In The Wholesale Lot: 

(10) Master Cartons of Copper Install Kits

 
These Copper Line Sets are Made IN THE USA. Pre-Flared, Pre-Insulated and ready to use. 

ATTN: Wholesale Lots over $4k Cannot be Processed on a Credit Card. Please Contact Our Sales Department or Choose Check/Wire at Checkout and receive an additional discount.

Air Conditioning and Refrigeration Tube

CLI provides a variety of solutions for Air Conditioning and Refrigeration needs.
Line-sets are copper tubing lines used to connect split system air conditioners and heat pumps. The two copper lines (liquid line and suction line) in the set are refrigerant lines that connect the condensing unit (air conditioner-outside) to the evaporator coil (e-coil) in the furnace unit.
The line-set tubes are Pre-Flared & Pre-Insulated using ACR Tube or a Level Wound Coil (LWC).
All CLI Air Conditioning and Refrigeration Tubes are produced with lubricants tested for R410A compatibility and formicary corrosion tested.

Pre-Flared & Pre-Insulated Line-Set: Line-sets are provided with a pre-insulated suction line paired with a bare liquid line in a convenient package. Line-sets have come into wide use in most areas of the country because they offer a better way to field connect split system air conditioners and heat pumps.
Major advantages include:

• Installation is quick, efficient, and economical.
• The continuous, factory-applied insulation has no seams which can open to allow moisture entry, bothersome dripping and decreased system efficiency.
• Tubes can be supplied in custom lengths for each job, reducing waste.
• Factory assembly assures quality and consistency.

CLI provides a variety of solutions for Air Conditioning and Refrigeration needs.
Line-sets are copper tubing lines used to connect split system air conditioners and heat pumps.
The two copper lines (liquid line and suction line) in the set are refrigerant lines that connect the condensing unit (air conditioner-outside) to the evaporator coil (e-coil) on the indoor unit.
The line-set tubes are Pre-Flared & Pre-Insulated using ACR Tube or a Level Wound Coil (LWC).
All CLI Air Conditioning and Refrigeration Tubes are produced with lubricants tested for R410A compatibility and formicary corrosion tested.

ACR Tube : Liquid line and suction line can be field constructed and insulated using our superior clean and plugged ACR tube.
This is typically for applications where a rigid straight tube provides the best solution for installation, such as commercial refrigeration applications.

LWC : CLI seamless smooth wall level wound copper tube is produced from a cathode based cast & roll process. A Level Wound Coil (LWC) is a long length of tube that is uniformly and tightly spooled in layers parallel to the axis of the coil. LWCs that require annealing are produced in our ultra clean annealing furnace which yields superior ID cleanliness. LWCs are used for a wide variety of applications in many industries.

 Facebook Pinterest Twitter

4.5'' Expandable Line Cover in Minisplitwarehouse.com

 4.5'' Expandable Line Cover in Minisplitwarehouse.com Choose from more than 200 products that suits your needs exactly! Shop 4.5'' Expandable Line Cover Heavy Duty by CoverGuard. Price: $169.99 ex. tax. Call us 877-770-3548 or visit our website.

LINK:

https://www.minisplitwarehouse.com/category/accessories

Kit includes:
	(3) 4′ Ducts
	(2) Couplers
	(1) Wall Inlet
	(1) End Cap
	(1) 90° Elbow
	(13) Cam Screws
	(6) Clips

---

Cover Guard Line Set Cover Features

---

Listed below are standard features for Cover Guards unique line set cover system.Guards single size expands in depth to save you time and money. The multi zone mini split solution. Cover Guard is heavy duty, its the strongest line set cover on the market.

• 
• The Cover Guards 4-stage adjustability is perfect to accommodate multiple zone line sets and allow the duct to expand from 2 to 4 inches deep.
• Stay-Clean peel-n-go film allows for a no-fuss clean-up following an install. 
• Free-sliding zip-tie clips are pre-installed, relocating quickly and easily to position the zip tie where its needed most.
• Components are paintable (see instructions for painting directions).
• Components are UV stabilized and tested to temperatures from -4 degrees F to 140 degrees F.
• Cover Guard components do not release under pressure. In fact, the greater the pressure exerted against the inside walls, the tougher the structure becomes, because the pressure causes the pieces to lock more tightly.
• Fittings can be opened and closed as needed, so the system can be adjusted as necessary at any time.
• Cam screws are constructed of hardened gun stock plastic. They will never rust. Quarter turn of the screw locks it in place for quick installation.

  

Ordering with a system?
Use the Following Coupon Code to get $19.99 OFF:  CGKIT
(Coupon Only Valid with Qualified Systems)

Midea Wholesale Lots in Minisplitwarehouse.com

 Midea Wholesale Lots in Minisplitwarehouse.com Our store offers a huge selection of Multi Zone Ductless Mini Splits online at wholesale prices. Get 10 Midea 36000 BTU 17.6 SEER Ceiling Cassette Hyper Heat Pump AC Lot. Price: $24,754.60 ex. tax. Call us 877-770-3548 or visit our website.

LINK:

https://www.minisplitwarehouse.com/category/wholesale-air-conditioner-ductless-mini-split-heat-pump-ac

Wholesale Lot : 10x 36000 BTU Midea Ceiling Cassette System/17.6 SEER
        

Included in Package:
*(10) Indoor Ceiling Cassette's with Remotes & Grills  
*(10) Hyper Heat Pump Outdoor Units (-22F/-13F)
*Requires 2 Sets of wires, 1-(set) for Power Indoor to Outdoor & 1-(set 16AWG) For Signal

    
INDOOR KEY FEATURES

KEY FEATURES

• Built-in Condensate Lift pump
  The cassette is supplied with a condensate lift pump that is capable of lifting the water 29.5 in. (750 mm.) above the top of the unit.
• 360° Air Flow Panel
  With the 360° air flow panel, air is distributed to every corner of the room.

FEATURES

• Available in 208/230V
• Up to 17.6 SEER and 10.6 HSPF when paired with DLCLR outdoor unit
• Modes: Cool, Heat, Dry, Fan, Auto
• Auto-restart function
• Louver control (fixed or swing)
• Three fan speeds
• Outside air intake
• Built-in condensate lift pump
• Follow Me (senses temperature at handheld remote)
• Heating Setback (46° F Heating Mode)
• Quiet indoor operation, as low as 49 dB(A)
• Aluminum Golden Hydrophilic pre-coated fins
• Grille/ceiling panel 3 x 3 sizes 24 to 48 KSALG0201AAA

Compatible With:

• DLCLR Outdoor Unit Single Zone

Color: White

 

---

OUTDOOR KEY FEATURES

• Extra Low Temperature Heating
  For when its cold outside, the heat output for this system is up to 69% of rated capacity down to -22° F (-30° C), making this a primary heat source and eliminating the need for a backup heat source.
• Stepless Frequency Adjustment
  Precise control of the system maintains stable and constant room temperature while reducing sound level and saving energy.

FEATURES

• Built-in basepan heater
• Auto-restart function
• Condenser high-temperature protection
• Refrigerant leakage detection
• Quiet outdoor operation, as low as 61.7 dB(A)
• Aluminum Hydrophilic pre-coated fins
• Max Piping length 213'
• Cooling operating range
  • -13° ~ 122° F (-25° ~ 50° C)
• Heating operating range
  • -22° ~ 86° F (-30° ~ 30°C)
    
    

Color:

Clay

---

 

 Facebook Pinterest Twitter

EMURA Ductless Mini Split Heat Pump in Minisplitwarehouse.com

 EMURA Ductless Mini Split Heat Pump in Minisplitwarehouse.com Why shop anywhere else when we have the best deals around? Get Daikin 12000 Btu 17 SEER EMURA Ductless Mini Split Heat Pump AC. Price: $1,749.99 ex. tax. Call us 877-770-3548 or visit our website.

LINK:

https://www.minisplitwarehouse.com/index.aspx?pageid=315961

New Daikin EMURA Series Heat Pump AC

*This Package Includes:

*(1) Indoor Unit with Remote

Indoor Unit Features:
Powerful Operation – Pushing the POWERFUL button on the remote control gives you a boost in cooling or heating power for a 20-minute period, even if the unit is already operating at high capacity.
ECO+ – An intelligent feature that ensures optimum energy consumption while fulfilling basic human comfort needs. Once activated, set temperature will be adjusted automatically to an optimum energy consumption level.
Blue Fin Protection – The hydrophilic coated fin ensures the condensate water moves easily to the drain pan — thus enhancing the cleanliness and lifespan of the cooling coil.
Titanium Apatite Photocatalytic Air Purifying Filter – This filter combines the air-purifying filter and titanium apatite photocatalytic deodorizing filter in a single highly effective unit.
Intellegent Eye & Comfort AirFlow-The INTELLIGENT EYE sensor detects human movement and adjusts the right and left airflow direction to avoid blowing air directly on the person. If no one is in the room for more than 20 minutes, the operation automatically changes to energy saving operation. The INTELLIGENT EYE sensor works differently depending on the situation. COMFORT AIRFLOW operation: The airflow direction is upward while in COOL operation, and downward while in HEAT operation. This function prevents cold or warm air from blowing directly on the occupants in the room.
4 Built In Timers-Up to 4 timer settings can be saved for each day of the week. This is convenient to adapt the WEEKLY TIMER to your family’s life style.

*(1) Outdoor Unit 220V


Brochure 
Heats & Cools (5f / 50f)
*(Cools to -4F with wind baffle and field settings)
Inverter Compressor
Precharged for up to 32.8ft
Anti Corrosion Treatment
Auto-Restart

*Daikin 12 Year Parts Warranty
Warranty Card
 User Manual  Submittal

Daikin has firmly established themselves as a world leader in heating and cooling equipment manufacturing, and their ductless systems are no exception. The Daikin Emura™ is a wall mounted system perfect for all your single zone heating and cooling needs. This system pairs a sleek, curved wall mounted indoor unit with an outdoor heat pump unit to provide warm and cool air quietly and efficiently to any single zone or room in your home. Daikin Emura™ indoor and outdoor units are designed with powerful energy saving features, allowing these systems to provide you with cost-efficient home comfort.

• Whisper Quiet Operation
• Daikin ductless units are engineered from the ground up for impressively quiet operation. The solid construction works together with quiet motor operation to make the units as unobtrusive as possible to its surrounding environment.
• Inverter Technology
• Daikin's inverter technology works together with the expansion valve to adjust coolant flow and compressor speed to match indoor conditions. This results in less dramatic temperature swings and a more comfortable home.
• Built-In Advanced Filtration System
• Daikin mini splits do more for your home's comfort level than control its temperature. A titanium apatite photo-catalytic air purification filter cleans the air, allowing the mini split to purify the air as well as heating and cooling it.
• Premium Comfort
• In Comfort Mode, you get draft-free operation in cooling and heating modes. When cooling, the flap is horizontal, preventing cold air from being blown directly on you. Heat mode positions the flap vertically downward to drive warm air to the floor.
• Night Set Mode
• Daikin Emura™ Night Set Mode prevents rapid temperature changes that may disturb your sleep.
• Included Wireless Control
• The included wireless control allows you to control the temperature of your room while never leaving the comfort of your favorite recliner. These unit are also compatible with the optional Daikin Comfort Control App.
• Intelligent Eye Sensor
• When a room is empty for 20 minutes, the Emura™ will revert back to the set point, saving energy. When someone enters the room, it will return to the original temperature setting.

Wired Thermostat in Minisplitwarehouse.com

 Wired Thermostat in Minisplitwarehouse.com Choose from more than 200 products that suits your needs exactly! Shop Daikin Wired Thermostat BRC1E73. Price: $254.99 ex. tax. Call us 877-770-3548 or visit our website.

LINK:

https://www.minisplitwarehouse.com/category/accessories

For use with the following Daikin models: FAQ, FBQ, FCQ, FHQ, FTQ, FXAQ, FXDQ,FXEQ, FXFQ, FXHQ, FXLQ, FXMQ, FXMQ_MF, FXNQ, FXTQ, FXUQ, FXZQ, FFQ Cassette's, FDMQ Ducted

• Basic Operation
• On/Off, Operation mode, Setpoint
• Fan speed, Airflow direction (menu)
• Function
• Configurable display – Standard, Detailed, and Simple (improved)
• Dual or single Cool and Heat setpoints for occupied periods (improved)
• Independent setback setpoints for unoccupied periods
• Unwanted buttons/operation modes can be disabled (improved)
• Power off eliminates setpoint and mode adjustment – configurable (improved)
• Setpoint range limitation
• Individual button prohibits (improved)
• Auto-changeover for Heat Recovery and Heat Pump systems with dual or single setpoints (improved)
• Automatic adjustment for Daylight Savings Time (DST) (improved)
• Schedule
• Weekly schedule – 7 day, weekday plus Saturday and Sunday (5 + 1 + 1), weekday plus weekend (5 + 2) and Everyday (1) (improved)
• Allows programming up to 5 events per day with Cool and Heat or single setpoints
• Setback configuration with Cool and Heat setpoints
• Display
• Detailed display mode
• Operation mode, Occupied and unoccupied setpoint(s), Fan speed, Airflow direction, Room temperature, Time, Day, and Status display
• Standard display mode
• Operation mode, Occupied and unoccupied setpoint(s), Fan speed, and Status display
• Simple display mode (new)
• Operation mode, Occupied and unoccupied setpoint(s), Fan speed, Room temperature
• Face decal option to hide unnecessary buttons (new)
• Other
• Backlit
• Room temperature sensor
• 12/24 hour clock
• Fahrenheit/Celsius selectable
• English/French/Spanish selectable (buttons and system status display are in English only)
• Remote control group – up to 16 indoor units

• Communication Wire: 18AWG‐2, No polarity, Stranded, Non‐shielded
• Total Wiring Length: 1,640 ft (500m)
• Communication Protocol: Daikin Proprietary P1P2 protocol
• Power: 16VDC supplied by Indoor unit (1.58VA maximum)
• Comfort Setpoint Range: 60 to 90 F (16 to 32 C)
• Setback Setpoint Range: 40 to 95 F (5 to 35 C)
• Operating Temp Range: 75% or less (w/o condensation)
• Weight (Mass): 0.42 lb (0.19 kg)

Installation Manual: CLICK
Operations Manual: CLICK